|
CanGlobal’s Hydraulic Rotary Torque System is designed for use on rigs that use a chain driven rotary table. The system displays a relative indication of rotary torque to alert drillers of changes in the drilling parameters to help avoid twist offs. With the use of the additional Rotary Alarm the system can be set to kick out automatically at a pre set torque value or to turn on an audible alarm. CanGlobal can also supply Rotary Torque systems to rigs that use a drive shaft type rotary table (Please contact us for additional information). System consists of a 6" Fluid filled gauge in either a box mount (damper attached to gauge) or Panel Mount (remote damper), Ider assemble with rubber wheel or chain sprocket, hydraulic hoses and couples as well as a recharge kit that consists of a hand pump and 1 liter of CanGlobal All Weather Instrument Fluid ordering) and recharge kit consisting of hand pump and 1 quart of instrument fluid.
Benefits:
- Provides early warning of impending over-torque situations and helps with decisions regarding bits and torque patterns.
- With the use of the additional Rotary Alarm the rotary table can be disengaged automatically OR a audible alarm can be activated to warn the driller of dangerous torque levels.
- System has been in use world wide for many years and has proven to reduce torque problems such as twist offs.
Features:
- Rugged 6” Fluid Filled gauge can be box mounted or panel mounted.
- Gauge readings are all relative indications of torque only
- Adjustable dial so gauge can be re-zeroed as pipe weight increases
- With the addition of the Rotary Alarms auto kick out feature operators can be assured that over torque situations are under control.
To Order Specify:
- Gauge reading 500 or 100 points
- Hose Length
- Box or panel mount
- Rubber wheel or chain sprocket (specify chain size)
- Length of hose
- Rotary Alarm power requirements (if required)
Delivers reliable torque measurements for rigs that use chain-driven rotary tables.
Available in box-mount or panel-mount configurations, the CanGlobal Hydraulic Rotary Torque System provides accurate indications of changes in torque for rigs that use chain-driven rotary tables. Each system includes an Idler assembly and a Gauge.
Features:
- 6-inch fluid-filled Gauge
- Available in 500 and 1,000 points
- Gauge has operator-adjustable dial to zero out drill string in order to monitor torque at the bit
- Standard 25-foot hose, with other hose lengths available
- Rugged Steel Sprocket available (replaces rubber wheel located in Idler assembly)
Benefits:
- Gauge damper minimizes pointer oscillations caused by drilling and drill string vibration, ensuring accurate readings and increasing the life-span of the gauge.
- Helps driller know when to change drill bits by indicating hole conditions and torque patterns.
- Increases safety and optimizes drilling efficiency by providing warnings about possible twist-offs, locked cones on the bit, out-of-gauge holes, and formation changes.
- Connects easily to CanGlobal drilling recorders to track and record trends.
To Order Specify:
- Bracket-mount or panel-mount gauge
- Gauge capacity
- Chain size
- Chain width (single or double)
- Hose length (25 feet is standard)
>> Return to Products |
