|
Designed with the oilfield in mind, CanGlobal has developed a low cost line tension sensor that fits a wide variety of cable sizes. This unique design does not require the user to cut any cables, it simply clamps onto the cable. The sensor has an extended temperature operating range. Available in both hardwired and wireless configurations.
Features:
- Accurate strain gauge measurement
- Designed for all deadline tension, electronic sensing applications
- Simple clamp-on design requires no deadline anchor.
- Environmentally sealed loadcell operates in the harshest of environments.
- Easy to use
- Installs on wire rope from ¾" to 2" diameter.
- Electronics are protected from reverse wire hook up.
- Custom engineering available.
Benefits:
- Industry standard 4-20mA signal
- Capacity: 100,000 lb. Line tension
Specifications:
- Safe Overload: 150% of rated capacity
- Ultimate Overload: 300% of rated capacity
- Excitation Voltage: 8 to 36 Vdc
- Output at Zero Load: 4.00 mA ± 0.05 mA
- Output at Capacity: 20.00 mA ± 0.05 mA
- Load Cell Calibration Error: less than ± 0.5% full-scale
- Thermal Sensitivity Shift: less than ± 0.01% full-scale /°F
- Thermal Zero Shift: less than ± 0.01% full-scale /°F
- Operating Temperature Range : -40°F to 140°F
- Storage Temperature Range : -40°F to 185°F
- Sensing Element: 700 ohm full bridge strain gages
- Insulation Resistance: 5,000 meg-ohm or better
- Electrical Connector: Brad Harrison P/N 1R4G06A20A120
>> Return to Products |
